Pour éditer le wiki, il faut demander un compte à un Lapin !
LeLoopRFID rue Chapon
From Le L∞p's Wiki
Revision as of 13:55, 11 April 2011 by Guyzmo (Talk | contribs) (→Resources for current installation of RFID in Le Loop)
Resources for current installation of RFID in Le Loop
- Arduino
- Stronglink SL030
- Black -> GND
- Vcc -> 3.3V (other end of the bus)
- CLK -> A4
- Data -> A3
- Shield Relay
- place shield on the 5V PIN on the lower left side
- on the Analog ?? on the lower right side
- and both couple of pins on the top between the hole (6-7;8-9)
- Schematic of Relay Shield
- Stronglink SL030
