AP Patator/config/fhap

Les pass sont ceux d'origine et sont à changer après réimport de la conf et validation du bon fonctionnement.

patator#show running-config
Building configuration...

Current configuration : 2146 bytes
!
! Last configuration change at 06:53:04 UTC Mon Mar 4 2002
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname patator
!
!
logging rate-limit console 2
enable secret 0 Cisco
!
no aaa new-model
no ip source-route
no ip cef
!
!
!
!
dot11 syslog
!
dot11 ssid WiFhAP
!
dot11 ssid WiFhAP 2.4GHz
   authentication open
   authentication key-management wpa version 2
   guest-mode
   wpa-psk ascii 7 00061F07075007090031
!  
dot11 ssid WiFhAP 5GHz
   authentication open
   authentication key-management wpa version 2
   guest-mode
   wpa-psk ascii 7 060403204F4505160A07
!
!
!
!
!
username CISCO password 0 Cisco
!
!
bridge irb
!
!
!
interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 encryption mode ciphers aes-ccm 
 !
 ssid WiFhAP
 !
 ssid WiFhAP 2.4GHz
 !
 antenna gain 0
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
 no ip address
 no ip route-cache
 !
 encryption mode ciphers aes-ccm 
 !
 ssid WiFhAP
 !
 antenna gain 0
 peakdetect
 no dfs band block
 channel dfs
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 no keepalive
 bridge-group 1
 bridge-group 1 spanning-disabled
 no bridge-group 1 source-learning
!
interface BVI1
 mac-address d867.d9d1.5958
 ip address 80.67.183.7 255.255.255.0
 no ip route-cache
 ipv6 address dhcp
 ipv6 address autoconfig
 ipv6 enable
!
ip default-gateway 80.67.183.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
snmp-server community loop42public RO
bridge 1 route ip
!         
!
!
line con 0
line vty 0 4
 login local
 transport input all
!
end