AP Patator/config/dashie

patator#show running-config 
Building configuration...

Current configuration : 1914 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname patator
!
logging rate-limit console 9
enable secret 5 $1$eha6$wtVWwJyx4w4FZ9fWj1ieK0
!
no aaa new-model
!
!
dot11 syslog
!
dot11 ssid patator 2.4GHz
   authentication open 
   authentication key-management wpa version 2
   guest-mode
   wpa-psk ascii 7 121B09161100000B253B
!
dot11 ssid patator 5GHz
   authentication open 
   authentication key-management wpa version 2
   guest-mode
   wpa-psk ascii 7 094E42081A0E1B1D041C
!
!
!
username Cisco password 7 112A1016141D
!
!
bridge irb
!
!
interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 encryption mode ciphers aes-ccm 
 !
 ssid patator 2.4GHz
 !        
 antenna gain 0
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface Dot11Radio1
 no ip address
 no ip route-cache
 !
 encryption mode ciphers aes-ccm 
 !
 ssid patator 5GHz
 !
 antenna transmit right-a
 antenna receive right-a
 antenna gain 0
 no dfs band block
 channel dfs
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface GigabitEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 no keepalive
 bridge-group 1
 no bridge-group 1 source-learning
 bridge-group 1 spanning-disabled
!
interface BVI1
 ip address dhcp client-id GigabitEthernet0
 no ip route-cache
!
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
snmp-server community public RO
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
 login local
!
end