Pour éditer le wiki, il faut demander un compte à un Lapin !

LeLoopRFID rue Chapon

From Le L∞p's Wiki
Revision as of 19:09, 18 July 2011 by ToM (Talk | contribs) (disambiguation)

Jump to: navigation, search
Attention.png Attention : This page describes our own autonomous RFID system, and does not describe the existing installation where the Loop actually lives.

Arduino

  • Stronglink SL030
    • Black -> GND
    • Vcc -> 3.3V (other end of the bus)
    • CLK -> A4
    • Data -> A3
Schematic of Relay Shield

Shield Relay

  • place shield on the 5V PIN on the lower left side
  • on the Analog ?? on the lower right side
  • and both couple of pins on the top between the hole (6-7;8-9)


Code

Dispo sur Github : https://github.com/LeLoop/LeLoopRFID

Retrieved from "http://wiki.leloop.org/index.php?title=LeLoopRFID_rue_Chapon&oldid=835"