Pour éditer le wiki, il faut demander un compte à un Lapin !

Difference between revisions of "AP Patator"

From Le L∞p's Wiki
Jump to: navigation, search
Line 84: Line 84:
 
</nowiki>
 
</nowiki>
  
−
=== Dump du show running config ===
+
Dump du [[AP_Patator/config/dashie|show running config]]
  
−
<nowiki>
 
−
patator#show running-config
 
−
Building configuration...
 
−
 
−
Current configuration : 1914 bytes
 
−
!
 
−
version 12.4
 
−
no service pad
 
−
service timestamps debug datetime msec
 
−
service timestamps log datetime msec
 
−
service password-encryption
 
−
!
 
−
hostname patator
 
−
!
 
−
logging rate-limit console 9
 
−
enable secret 5 $1$eha6$wtVWwJyx4w4FZ9fWj1ieK0
 
−
!
 
−
no aaa new-model
 
−
!
 
−
!
 
−
dot11 syslog
 
−
!
 
−
dot11 ssid patator 2.4GHz
 
−
  authentication open
 
−
  authentication key-management wpa version 2
 
−
  guest-mode
 
−
  wpa-psk ascii 7 121B09161100000B253B
 
−
!
 
−
dot11 ssid patator 5GHz
 
−
  authentication open
 
−
  authentication key-management wpa version 2
 
−
  guest-mode
 
−
  wpa-psk ascii 7 094E42081A0E1B1D041C
 
−
!
 
−
!
 
−
!
 
−
username Cisco password 7 112A1016141D
 
−
!
 
−
!
 
−
bridge irb
 
−
!
 
−
!
 
−
interface Dot11Radio0
 
−
no ip address
 
−
no ip route-cache
 
−
!
 
−
encryption mode ciphers aes-ccm
 
−
!
 
−
ssid patator 2.4GHz
 
−
!       
 
−
antenna gain 0
 
−
station-role root
 
−
bridge-group 1
 
−
bridge-group 1 subscriber-loop-control
 
−
bridge-group 1 block-unknown-source
 
−
no bridge-group 1 source-learning
 
−
no bridge-group 1 unicast-flooding
 
−
bridge-group 1 spanning-disabled
 
−
!
 
−
interface Dot11Radio1
 
−
no ip address
 
−
no ip route-cache
 
−
!
 
−
encryption mode ciphers aes-ccm
 
−
!
 
−
ssid patator 5GHz
 
−
!
 
−
antenna transmit right-a
 
−
antenna receive right-a
 
−
antenna gain 0
 
−
no dfs band block
 
−
channel dfs
 
−
station-role root
 
−
bridge-group 1
 
−
bridge-group 1 subscriber-loop-control
 
−
bridge-group 1 block-unknown-source
 
−
no bridge-group 1 source-learning
 
−
no bridge-group 1 unicast-flooding
 
−
bridge-group 1 spanning-disabled
 
−
!
 
−
interface GigabitEthernet0
 
−
no ip address
 
−
no ip route-cache
 
−
duplex auto
 
−
speed auto
 
−
no keepalive
 
−
bridge-group 1
 
−
no bridge-group 1 source-learning
 
−
bridge-group 1 spanning-disabled
 
−
!
 
−
interface BVI1
 
−
ip address dhcp client-id GigabitEthernet0
 
−
no ip route-cache
 
−
!
 
−
ip http server
 
−
no ip http secure-server
 
−
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
 
−
snmp-server community public RO
 
−
bridge 1 route ip
 
−
!
 
−
!
 
−
!
 
−
line con 0
 
−
line vty 0 4
 
−
login local
 
−
!
 
−
end
 
−
</nowiki>
 
  
 
=== TODO ===
 
=== TODO ===

Revision as of 00:51, 9 January 2015

Warning construction blue.png Cette page est un brouillon en cours de rédaction.


PATATOR

La configuration de cet AP est en cours par Dashie Et repris par dlgg

Modif du 22/10/2014 : show running-config

  • Mise à jour en 15.3(3)JAB (03/09/2014)
  • Disable http server
  • Enable http secure-server
  • Mise en place vlans
  • SSID => piscine2

Note :

  • Pas de mots de passes configurés pour les accès, google it
  • SSID 2.4 et 5 séparés
  • IP de la borne en DHCP
  • De la doc de config doc cisco

Configuration physique

  • Ethernet : gigabit
  • Power : 48V, POE ou prise dédiée
  • Prise console standard cisco
  • 2.4GHz ANTENNA "A - Rx-Tx" : antenne
  • 2.4GHz ANTENNA "C - Rx" : rien
  • 2.4GHz ANTENNA "B - Rx-Tx" : antenne
  • 5GHz ANTENNA "A - Rx-Tx" : antenne
  • 5GHz ANTENNA "C - Rx" : rien
  • 5GHz ANTENNA "B - Rx-Tx" : rien
  • Le 5GHz est configuré pour utiliser la même antenne pour Rx et Tx, a voir pour une seconde antenne
  • Le 2.4GHz utilise une antenne dédiée au Rx et une dediée au Tx

Notes sur l'AP et la config faite via WEB-UI

cisco AIR-AP1262N-E-K9     (PowerPC460exr) processor (revision A0) with 81910K/49152K bytes of memory.
Processor board ID FCZ1626Z17A
PowerPC460exr CPU at 666Mhz, revision number 0x18A8
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: D8:67:D9:D1:59:58
Part Number                          : 73-12175-06
PCA Assembly Number                  : 800-32268-06
PCA Revision Number                  : A0
PCB Serial Number                    : FOC16223341
Top Assembly Part Number             : 800-33866-02
Top Assembly Serial Number           : FCZ1626Z17A
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1262N-E-K9    


Express setup :
hostname : patator
mac :  d867.d9d1.5958 
ip : dhcp
snmp : public
radio 2.4 : AP
radio 5 : AP

network interfaces -> 5GHz -> Antennas
Rx : right (A), Tx : right (A)

security -> encryption Manager
pour les deux radios
Cipher -> AES CCMP

security -> SSID Manager
SSID en 2.4 et 5GHz, juste adapter le nom et interface : 
nom : patator 2.4GHz
interface : radio 2.4GHz
key mgmt : mendatory
[x] wpa
-> WPAv2
pre shared key : blackloop

revenir dans ssid manager, tout en bas, passer le 2.4 et 5 en "single" et choisir le ssid a droite dans le menu deroulant


network interfaces -> status des if wifi

Dump du show running config


TODO

 no ip http server
 ip http secure-server