@@ Line 1: / Line 1: @@
-= Resources for current installation of RFID in Le Loop =
+Resources for current installation of RFID in Le Loop
-* Arduino
+== Arduino ==
-** [http://www.stronglink.cn/english/SL030.htm Stronglink SL030]
+* [http://www.stronglink.cn/english/SL030.htm Stronglink SL030]
-*** Black -> GND
+** Black -> GND
-*** Vcc -> 3.3V (other end of the bus)
+** Vcc -> 3.3V (other end of the bus)
-*** CLK -> A4
+** CLK -> A4
-*** Data -> A3
+** Data -> A3
-** Shield Relay
-*** place shield on the 5V PIN on the lower left side
+[[File:LeLoopRFID_schematic.png|right|frame|Schematic of Relay Shield]]
-*** on the Analog ?? on the lower right side
-*** and both couple of pins on the top between the hole (6-7;8-9)
+== Shield Relay ==
-** Schematic of Relay Shield
-*** [[File:LeLoopRFID_schematic.png]]
+* place shield on the 5V PIN on the lower left side
-** Code
+* on the Analog ?? on the lower right side
-*** https://github.com/LeLoop/LeLoopRFID
+* and both couple of pins on the top between the hole (6-7;8-9)
+== Code ==
+Dispo sur Github : https://github.com/LeLoop/LeLoopRFID
 [[Category:RFID]] [[Category:Projets]]

Difference between revisions of "LeLoopRFID rue Chapon"

Revision as of 16:59, 8 May 2011